Embedded Single Board Computer - SBC
A000056 is a Arduino Ethernet Shield, which allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 Ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to 4 simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The Ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top. The most recent revision of the board exposes the 1.0 pin out on rev 3 of the Arduino UNO board. The Ethernet Shield has a standard RJ-45 connection, with an integrated line transformer and Power over Ethernet enabled. There is an on-board micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega. The on-board microSD card reader is accessible through the SD Library.
Запросить цену- Артикул
- Embedded Single Board Computer - SBC
- Наличие
- Под заказ
- Срок поставки
- 3–4 недели
- Цена
- По запросу
Похожие позиции
- Embedded Single Board Computers - SBC - ARMЗапросить цену
- Embedded Single Board Computers - SBC - BeagleBoardBBONE-BLACK-4G is the element14 BeagleBone Black development kit for developers and the avid hobbyist. It is a lower cost, high expansion focused BeagleBoard using a low cost Sitara AM3358BZCZ100 Cortex A8 ARM processor from Texas Instruments. The board boots Linux in under 10sec and the user can get started on development in less than 5min with just a single USB cable. It is similar to the Beaglebone, but with some features removed and some features added.Запросить цену
- Embedded Single Board Computers - SBC - Raspberry PiThe Raspberry Pi Compute Module 3 + (CM3+) are DDR2-SODIMM-mechanically-compatible System on Modules (SoMs) containing a processor, memory, eMMC Flash (except "Lite" version) and supporting power circuitry. These modules allow a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form factors. In addition the modules have extra I/O interfaces over and above what is available on the Raspberry Pi model A/B boards, providing more options and fostering rapid development for the designer. The Compute Module 3 + 16GB has a 200 pin SODIMM design and contains 16GB of on-board eMMC flash memory.Запросить цену
- Embedded Single Board Computers - SBC - Other Embedded ComputersCME-8GB60 is an evaluation or development board for the M9S08GB60 microcontroller. Development of applications is quick and easy. The prototyping area provides space to apply the CPU I/O to user needs. The BDM port is provided for development tool application and is compatible with HCS08 BDM interface cables and software. Board is provided operating the NXP binary monitor. The monitor allows serial interface to host based development environments for source level debugging operations.Запросить цену